Rear Lid Striker Pin, Adjusting

Rear Lid Striker Pin, Adjusting

• Loosen the bolts - 1 - and slide the rear lid catch - 2 - in the oversized holes - arrows a and b -.

• Adjust the striker pin - 2 - so that the rear lid lock recess with the rotary latch engages with the center of the striker pin - 2 -.






Perform the following:

- Remove the lock carrier cover..

- Loosen the bolts - 1 -.

- Move the striker pin - 2 - into the upper position and tighten the bolts - 1 -.

- Lock the rear lid and check the adjustment.

- Screw - 1 - tightening specification: 18 Nm.