Plenum Chamber Bulkhead Assembly Overview

Plenum Chamber Bulkhead Assembly Overview






1 Center plenum chamber bulkhead

• Removing:

- Remove plenum chamber cover. Refer to => [ Plenum Chamber Cover ] Plenum Chamber Cover.

- Remove the bolt - 2 -.

- Pull the plenum chamber bulkhead up out of the plenum chamber - 4 -.

2 Left plenum chamber bulkhead

3 Bolt

• Quantity: 8

• Tightening specification: 6 Nm

4 Seal

• For the left plenum chamber bulkhead

• When installing the plenum chamber bulkhead, make sure the seal is seated correctly.

5 Insulation

• For the left plenum chamber bulkhead

• Secured with lock washers

6 Lock washer

• For securing the insulation to the plenum chamber bulkhead

7 Insulation

• For the center plenum chamber bulkhead

• Secured with lock washers

8 Insulation

• For the right plenum chamber bulkhead

• Secured with lock washers

9 Seal

• For the right plenum chamber bulkhead

• When installing the plenum chamber bulkhead, make sure the seal is seated correctly.

10 Right plenum chamber bulkhead

11 Hex nut

• Quantity: 5

• Tightening specification: 6 Nm