Front Bumper Cover, Center Vent Grille

Center Vent Grille






Removing

- Detach the clips - 3 - for the license plate holder, remove the license plate holder - 4 -.

- Use the trim removal wedge (3409) to detach the 10 retaining hooks - 5 -.

- Pull the vent grille - 1 - slightly out of the bumper cover - 2 -.

- Detach any harness connectors.

Information regarding the parking aid.

Information regarding the environmental camera.

Installation

- Reconnect the harness connectors.

- Insert the vent grille - 1 - in the bumper cover - 2 - until the retaining hooks - 5 - engage.