Function

Function

The panorama sunroof only works when the ignition is switched on.

After the ignition is switched off, these functions are available until the driver or passenger door is opened.

The opening of front glass panel is pre-selected using the rotary knob - 1 -.






Opening the glass sunroof in the so-called comfort setting - 4 - prevents most driving noise which may occur when open completely.

The glass panel can be tilted and closed by pulling or pushing the rotary knob.

The button to open - 2 - and close - 3 - the sun shade are integrated in the rotary knob - 1 -.

The panorama sunroof is equipped with a closing force limit. When an obstruction is met during the closing operation from the lifting or sliding position, the glass panel automatically opens again.

There is also an emergency closing function. If there are problems closing the panorama sunroof, it can be forced closed by pulling on the back end - arrow - of the rotary knob. The rotary knob must be in the "sunroof closed" position.

For the emergency close function, the closing force limit is deactivated.

The sunroof motor has overheat protection, which activates under different conditions. After the sunroof motor has cooled down, it can be operated again.

If there is a malfunction in the electrical system, the glass panel and sunshade can be moved manually. Refer to => [ Operating without Electricity ] Operating without Electricity.