Sun Shade Motor

Sun Shade Motor

Removing






Perform the following:

- Removing headliner..

- Disconnect the harness connector - 2 - from the sun shade motor - 1 -.

- Remove the bolts - 3 -.

- Remove the sun shade motor - 1 -.

Installation

Install in reverse order of removal.

Perform the following:

- Prior to installation of the sun shade motor, the sun shade must be aligned to be parallel.

- Measure and adjust the distance - dimension a - between the shade arch - 1 - and the shade cartridge - 2 -.






Tightening Specifications

Screws - 3.5 Nm

- After completing all work steps, perform an adaptation on the sun shade motor. Refer to => [ Panorama Sunroof Adaptation ] Panorama Sunroof Adaptation.