Sunroof Motor

Sunroof Motor

Removing






Perform the following:

- Remove front light and control unit.

- Remove the bolts - 3 -.

- Lower the sunroof motor - 1 - slightly and tilt it out toward the back.

- Disconnect the connector - 4 -.

Installation






with the front glass panel removed:

- Slide the tilting mechanism - 3 - on both sides all the way forward until it is completely lowered.

- If necessary, move the tilting mechanism - 3 - on both sides so that the markings - 5 - form one line - arrows b -.






- Install the sunroof motor - 1 - and tighten the bolts - 2 -. Tightening torque: 3.5 Nm.

- Connect the harness connector - 4 -.

- Install the headliner..

- After completing all work steps, perform an adaptation on the sunroof motor. Refer to => [ Panorama Sunroof Adaptation ] Panorama Sunroof Adaptation.