Bench Seat Covers and Cushion

Bench Seat Covers and Cushion

• The description relates to the 2/3 unit of the rear seat backrest. The work steps for the 1/3 unit are to be derived from this.

Removal

- Switch off the ignition.

- Remove the bench seats. Refer to => [ Bench Seats ] Bench Seats.

- Cut all upholstery clips on the bottom of the bench seat and roll up the cover on the sides.

- Use pliers - 4 - in the cushion channels to cut all upholstery clips - 3 -.






- Remove the cover - 1 - from the cushion - 2 -.

Installation

Installation is performed in the reverse order of removal.

• When installing upholstery clips, use upholstery clip pliers (V.A.G 1634).