Tunnel Side Trim

Tunnel Side Trim

• Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.

Removing

- Remove seat. Refer to=> [ Front Seat ] Front Seat.

- Remove the belt latch. Refer to => [ Front Belt Latches ] Front Belt Latches.

- Press the clamping pin - 1 - inward out of the expanding clip - 2 -.

- Remove the expanding clip.






- Press the clamping pin - 2 - inward out of the expanding clip - 1 -.

- Remove the expanding clip.

- Carefully pull the trim in the area of the guide pin - 3 - backward off of the seat.






Installation

- To install, perform the steps used for removal in reverse order.