Bench Seats

Bench Seats

Removing

- Turn off the ignition.

- Move both bench seats as far back as possible.

- Use both hands to grasp in the area of the mounting grommet - 4 - under the 2/3 unit of the bench seat - 1 -.

- Use both hands to pull the bench seat abruptly and forcefully upward and pull the wire bracket - 5 - out of the mounting grommet - 4 -.

- Unclip the 2/3 unit of the bench seat from the mounting grommets - 2 - and - 3 - as described.

- Fold up the 2/3 unit of the bench seat and disconnect any electrical harness connectors according to the vehicle equipment.

- Detach the 2/3 unit of the bench seat in the rear area and remove from the vehicle.

- The 1/3 unit of the bench seat - 6 - is removed accordingly.






Installation

- Remove the 5 mounting grommets from the seat frames.

- Insert the new mounting grommets until they engage audibly in the seat frames.

- Attach the bench seats in the rear area via the wire brackets.

- Connect any electrical harness connectors according to the vehicle equipment.

- Engage the bench seats in the mounting grommets of the seat frames via the front wire brackets.