Inner Trims of the Rear Seats

Inner Trims of the Rear Seats

• Removal and installation of the trim are described for the inner trim of the 2/3 unit. Removal and installation of the inner trim of the 1/3 unit are performed in the same manner.

Removing

- Turn off the ignition.

- Remove the bench seats. Refer to => [ Bench Seats ] Bench Seats.

- Remove the rear seats. Refer to => [ Rear Seats ] Rear Seats.

- Release the rear seat backrest and tilt it forward slightly but do not fold it all the way down.

- Remove the bolt - 1 - (2 Nm).






- Detach the retaining hooks on the lower trim with a screwdriver from the rear seat backrest - arrow A -.

- Pull the trim - 2 - upward in the - direction of arrow B - off of the rear seat.

- Carefully detach the trim - 3 - from the rear seat.

• The trim - 3 - is only installed in the 2/3 unit.

Installation

To install, perform the steps used in removal in reverse order.