Outer Trims of the Rear Seats

Outer Trims of the Rear Seats

• Removal and installation of the trim are described for the outer trim of the 2/3 unit. Removal and installation of the outer trim of the 1/3 unit are performed in the same manner.

Removing

- Remove the bench seats. Refer to => [ Bench Seats ] Bench Seats.






- Release the rear seat backrest and tilt it forward slightly but do not fold it all the way down.

- Remove the bolt - 3 - (2 Nm).

- Open the lower latch - 2 - on the trim.

- Detach the retaining hooks on the lower trim with a screwdriver from the rear seat backrest - arrow A -.

- Remove the cover - 1 - from the backrest in - direction of arrow B -.

Installation

To install, perform the steps used in removal in reverse order.