Pass-Through
Pass-Through
• For the sake of clarity, the cover and cushion of the pass-through are not depicted in the figure.
Removing
- Fold the pass-through - 5 - forward.
- Detach the clamping strip - 1 - from the mounting profile - 3 - and fold up the carpet.
- Use a screwdriver to detach the retaining rings from the bolts - 2 - and - 4 -.
Instead of the retaining ring - 4 -, a fitting bolt can be installed.
- Remove the fitting bolt - 1 - (18 + / - 1 Nm).
- Slide the pass-through to the right - arrow - and remove.
Installation
To install, perform the steps used in removal in reverse order.