Diagram 27/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Data bus on board diagnostic interface, Electromechanical parking brake control module, Left parking brake motor, Right parking brake motor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J533 - Data bus on board diagnostic interface Control Modules in Interior

J540 - Electromechanical parking brake control module Overview of Control Modules in Luggage Compartment Locations [1][2]Diagrams

T4ao - 4-pin connector

T4ap - 4-pin connector

T10 - 10-pin connector Overview: Coupling Stations Inside The Luggage Comp.

T10a - 10-pin connector Overview: Coupling Stations Inside The Luggage Comp.

T30 - 30-pin connector

T32a - 32-pin connector

V282 - Left parking brake motor Locations Left Parking Brake Motor -V282-

V283 - Right parking brake motor Locations Right Parking Brake Motor -V283-

(B672) - Suspension/instrument cluster CAN bus high connection 1 (in main wiring harness)

(B673) - Suspension/instrument cluster CAN bus high connection 2 (in main wiring harness)

(B674) - Suspension/instrument cluster CAN bus high connection 3 (in main wiring harness)

(B676) - Suspension/instrument cluster CAN bus low connection 1 (in main wiring harness)

(B677) - Suspension/instrument cluster CAN bus low connection 2 (in main wiring harness)

(B678) - Suspension/instrument cluster CAN bus low connection 3 (in main wiring harness)

Previous Diagram 27/2 (Tracks 1-14)

Next Diagram 27/4 (Tracks 29-42)