Diagram 53/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Power steering control module, Data bus on board diagnostic interface, Instrument cluster





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J285 - Instrument cluster control module Control Modules in Interior

J500 - Power steering control module Control Modules in Engine Compartment Power Steering Control Module -J500- [1][2]Diagrams

J533 - Data bus on board diagnostic interface Control Modules in Interior

K - Instrument cluster

K161 - Electromechanical power steering indicator lamp

SB30 - Fuse 30 (on fuse panel B) Locations

T2hu - Double connector

T3s - 3-pin connector

TV2 - Terminal 30 wire junction

T32 - 32-pin connector

T32a - 32-pin connector

V466 - Electrical power steering pump Hybrid Components Overview Electrical Power Steering Pump -V466-

(12) - Ground connection in engine compartment, left Overview Of Ground Connections in Engine Compartment

(B403) - Comfort system CAN bus high connection 7 (in main wiring harness)

(B412) - Comfort system CAN bus low connection 7 (in main wiring harness)

(B506) - Comfort CAN bus high connection (in interior wiring harness)

(B507) - Comfort CAN bus low connection (in interior wiring harness)

(B750) - CAN bus High display and control connection 1

(B751) - CAN bus Low display and control connection 1

(B752) - CAN bus High display and control connection 2

(B753) - CAN bus Low display and control connection 2

* - only for vehicles with hybrid drive

Previous Diagram 53/2 (Tracks 1-14)