Diagram 14/4 (Tracks 29-42)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Transfer case operating unit, Vehicle electrical system control module, Data bus on board diagnostic interface, Differential control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E473 - Transfer case operating unit

J519 - Vehicle electrical system control module Control Modules in Interior

J533 - Data bus on board diagnostic interface Control Modules in Interior

J646 - Differential control module Control Modules in Interior

K181 - Normal operation indicator lamp in differential controller

K183 - Center differential lock -activated- indicator lamp in differential controller

K184 - Rear differential lock -activated- indicator lamp in differential controller

K210 - Gear range acquisition indicator lamp

T16l - 16-pin connector

T32a - 32-pin connector

T47a - 47-pin connector

(388) - Ground connection 23 (in main wiring harness)

(A19) - Connection (58d) (in instrument panel wiring harness)

(B343) - Connection 4 (58d) (in main wiring harness)

(B672) - Suspension/instrument cluster CAN bus high connection 1 (in main wiring harness)

(B673) - Suspension/instrument cluster CAN bus high connection 2 (in main wiring harness)

(B676) - Suspension/instrument cluster CAN bus low connection 1 (in main wiring harness)

(B677) - Suspension/instrument cluster CAN bus low connection 2 (in main wiring harness)

Previous Diagram 14/3 (Tracks 15-28)

Next Diagram 14/5 (Tracks 43-56)