Left Footwell Vent Temperature Sensor (G261)

Left Footwell Vent Temperature Sensor (G261)

Removal

- Remove the lower instrument panel trim..

- Disconnect the harness connector from left footwell vent temperature sensor - 1 -.

- Rotate left footwell vent temperature sensor - 1 - approximately 90° in the - direction of the arrow - out of footwell vent - 2 -.






Installation

- Install the left footwell vent temperature sensor in the reverse order.

- After completing the repair, perform the following: basic setting, refer to => [ Checking and Adjusting Components ] Checking and Adjusting Components.