Right Footwell Vent Temperature Sensor (G262)

Right Footwell Vent Temperature Sensor (G262)

• The right footwell vent temperature sensor is located on the rear side of the footwell vent. To improve the clarity of the illustration, it is shown from a different view.

Removal

- Remove the lower instrument panel trim..

- Disconnect the harness connector from right footwell vent temperature sensor - 2 -.

- Turn right footwell vent temperature sensor - 2 - approximately 90° in the - direction of the arrow - out of footwell vent - 1 -.






Installation

- Install the right footwell vent temperature sensor in the reverse order.

- After completing the repair, perform the following: basic setting, refer to => [ Checking and Adjusting Components ] Checking and Adjusting Components.