Sunroof Switch (E8)

Sunroof Switch (E8)

Removal

When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool (plastic wedge, screwdriver) will be positioned using commercially available adhesive tape.

- Turn off the ignition and all electric consumers and remove the key.

- Remove front interior lamp. Refer to => [ Front Interior Lamp (W1) ] Front Interior Lamp (W1).

- Disengage retaining tabs - arrows -.






- Disconnect harness connector - arrow - and remove Sunroof switch from trim.






Installation

Install in reverse order of removal.