Rear Lamps

Rear Turn Signal Bulb

• The LEDs in the tail and brake lamp also serve as the turn signal on USA and Canada vehicles.

• USA and Canada models do not have a left rear turn signal bulb (M6) or right rear turn signal bulb (M8).

Removing

- Turn off the ignition and all electrical consumers and remove the key.

- Remove the side panel tail lamps. Refer to => [ Side Panel LED Tail Lamps ] Side Panel LED Tail Lamps.

- Open the tabs - arrows - and remove the bulb holder - 1 - from the tail lamp housing. Pay attention to the wires still connected.






Push the turn signal bulb - 2 - slightly into the bulb socket, turn it to the left and remove it from the bulb holder - 1 -.






Rear turn signal bulb: 12V / PY21W

Installing

Installation is performed in the reverse order of removal. Note the following:

• Make sure all 4 tabs are secure when installing the bulb holder.