Oxygen Sensors

Oxygen Sensors

Oxygen Sensor Connectors










Removing

Special tools, testers and auxiliary items required

• Ring Spanner 7 Piece Set (3337)

• During installation, all cable ties must be installed at the same location.

- Disconnect the hoses - 1 and 2 - and remove the connecting pipe - arrows -.






- Remove the upper air filter housing.

- Disconnect the connector for the oxygen sensor to be removed and expose the wire.

- Remove the oxygen sensors using the ring spanner 7 piece set (3337).






1. Heated oxygen sensor (exhaust bank 2, sensor 1)

2. Oxygen sensor after three way catalytic converter (exhaust bank 1, sensor 2)

3. Heated oxygen sensor 2 (exhaust bank 2, sensor 1)

4. Oxygen sensor 2 after catalytic converter (exhaust bank 2, sensor 2)