Diagram 57/10 (Tracks 113-126)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Heated oxygen sensor, Oxygen sensor after three way catalytic converter, Engine control module, EVAP canister purge regulator valve 1, Camshaft adjustment valve 1, Fuel pressure regulator valve, Intake manifold runner control valve, Exhaust camshaft adjustment valve 1





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

GX7 - Oxygen sensor 1 after catalytic converter Oxygen Sensor 1 After Catalytic Converter -GX7- - G130/Z29

GX10 - Oxygen sensor 1 before catalytic converter Oxygen Sensor 1 Before Catalytic Converter -GX10- - G39/Z19

G39 - Heated oxygen sensor Locations Oxygen Sensor 1 Before Catalytic Converter -GX10- - G39/Z19

G130 - Oxygen sensor after three way catalytic converter Locations Oxygen Sensor 1 After Catalytic Converter -GX7- - G130/Z29

J623 - Engine control module Control Modules in Engine Compartment

N80 - EVAP canister purge regulator valve 1 Locations [1][2]Canister Purge Control Valve

N205 - Camshaft adjustment valve 1 Locations Camshaft Adjustment Valve 1 -N205-

N276 - Fuel pressure regulator valve Locations [1][2]Diagrams

N316 - Intake manifold runner control valve Locations Intake Manifold Runner Control Valve -N316-

N318 - Exhaust camshaft adjustment valve 1 Locations

T2en - Double connector

T2fw - Double connector

T2gc - Double connector

T2gk - Double connector

T2ht - Double connector

T4cr - 4-pin connector

T6as - 6-pin connector Overview, Coupling Stations Inside The Engine Compartment

T6at - 6-pin connector Overview, Coupling Stations Inside The Engine Compartment

T6mb - 6-pin connector

T60 - 60-pin connector

T94 - 94-pin connector

Z19 - Oxygen sensor heater Locations Oxygen Sensor 1 Before Catalytic Converter -GX10- - G39/Z19

Z29 - Heater for oxygen sensor 1 after catalytic converter Oxygen Sensor 1 After Catalytic Converter -GX7- - G130/Z29

(D173) - Connection (87) (in engine wiring harness)

(D196) - Connection 2 (87a) (in engine wiring harness)

(E28) - Oxygen sensor heater connection (in Motronic multiform fuel injection wiring harness)

(E69) - Oxygen sensor heater connection 2 (in Motronic multiform fuel injection wiring harness)

Previous Diagram 57/9 (Tracks 99-112)

Next Diagram 57/11 (Tracks 127-140)