Diagram 57/11 (Tracks 127-140)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Oil pressure switch, Throttle valve control module, Engine speed sensor, Heated oxygen sensor 2, Oxygen sensor 2 after catalytic converter, Engine control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F1 - Oil pressure switch Locations

GX3 - Throttle valve control module [1][2]Diagrams

GX8 - Oxygen sensor 2 after catalytic converter

GX11 - Oxygen sensor 2 before catalytic converter Oxygen Sensor 2 Before Catalytic Converter -GX11- - G108/Z28

G28 - Engine speed sensor Locations [1][2]Diagrams

G108 - Heated oxygen sensor 2 Locations Oxygen Sensor 2 Before Catalytic Converter -GX11- - G108/Z28

G131 - Oxygen sensor 2 after catalytic converter Locations Oxygen Sensor 2 After Catalytic Converter -G131- / -Z30-

G186 - EPC throttle drive [1][2]Diagrams

G187 - EPC throttle drive angle sensor 1 [1][2]Diagrams

G188 - EPC throttle drive angle sensor 2 [1][2]Diagrams

J338 - Throttle valve control module Locations [1][2]Diagrams

J623 - Engine control module Control Modules in Engine Compartment

T1b - Single connector

T3bo - 3-pin connector

T4cs - 4-pin connector

T6ao - 6-pin connector

T6at - 6-pin connector Overview, Coupling Stations Inside The Engine Compartment

T6mc - 6-pin connector

T60 - 60-pin connector

T94 - 94-pin connector

Z28 - Oxygen sensor 2 heater Oxygen Sensor 2 Before Catalytic Converter -GX11- - G108/Z28

Z30 - Heater for oxygen sensor 2 after catalytic converter Oxygen Sensor 2 After Catalytic Converter -G131- / -Z30-

Previous Diagram 57/10 (Tracks 113-126)

Next Diagram 57/12 (Tracks 141-154)