Axle Differential Lock Control Module (J647)
Axle Differential Lock Control Module (J647)
Removing
- Turn off the ignition and all electric consumers.
- Remove the lock carrier cover.
- Remove the right D-pillar trim.
- Remove the clip- arrow -.
- Unclip the side trim panel on the side window and carefully push it slightly to the side in the - direction of the arrow -.
- If necessary, disconnect the connectors and unclip the interior lamp from the side trim panel.
- Disconnect the connector - 1 - from the axle differential lock control module.
- Unclip and remove - 3 - the axle differential lock control module from the bracket - 2 -.
Installing
Installation is performed in the reverse order of removal: