Right Flange Shaft Seal, Final Drive 0BN

Right Flange Shaft Seal, Final Drive 0BN

Special tools, testers and auxiliary items required

• Slide Hammer-Complete Set (VW 771)

• Additional Part for VW 771 (VW 771/37)

• Press Tool for Shaft Seal (T10181)

• Sealing Grease for Seal (G 052 128 A1)

Removing

- Remove the rear final drive. Refer to => [ Rear Final Drive ] Rear Final Drive.

- Remove the flange shaft seal using the slide hammer-complete set (VW 771) and the additional part for VW 771 (VW 771/37).






Installing

- Install the new seal until seated using the press tool for shaft seal (T10181).






- Fill the space between the sealing and dust lips half way with sealing grease for seal (G 052 128 A1).

- Install the rear final drive. Refer to => [ Rear Final Drive ] Rear Final Drive.

- Check the rear final drive gear oil level. Refer to => [ Rear Final Drive Gear Oil Level, Checking ] Rear Final Drive Gear Oil Level, Checking.