Clutch: Adjustments

***UPDATED BY TSB 4130, MARCH 1987
MODELS W/MECHANICAL ACTUATION

Adjustment is carried out at point at which cable attaches to fork, or by turning adjusting nuts on clutch actuating cable where cable attaches to side of clutch housing. To check adjustment, push clutch fork fully toward front (models with return spring) or rear (models without return spring) of vehicle. Clutch lever play should be 2.5 - 3.5 mm (.10 -.13 inch.).

MODELS W/HYDRAULIC ACTUATION

This system is designed so clutch fork and throw-out bearing touch lightly on pressure plate. No provision for adjustment is provided.