Maintenance: Technical Service Bulletins

• Customer Interest
  • A/C - Remove Clamp to Prevent Hose Break
  • Engine - Poor Driveability When Cold
  • Distributor - Oil Leakage
  • Fuse Holder - Deformed
  • Engine - Hard Cold Starting and Performance
• By Symptom
  • Abnormal wear/deterioration
    • A/C - Remove Clamp to Prevent Hose Break
    • Power Steering Pressure Hose - Revised Clamp Required
    • Fuse Holder - Deformed
  • Customer Interest
    • A/C - Remove Clamp to Prevent Hose Break
    • Engine - Poor Driveability When Cold
    • Distributor - Oil Leakage
    • Fuse Holder - Deformed
    • Engine - Hard Cold Starting and Performance
  • Driveability
    • Engine - Poor Driveability When Cold
  • Leaks
    • Power Steering Pressure Hose - Revised Clamp Required
    • Distributor - Oil Leakage
  • Poor performance
    • Engine - Hard Cold Starting and Performance
  • Starting problems
    • Engine - Poor Driveability When Cold
    • Engine - Hard Cold Starting and Performance
  • Stiff controls
    • Power Steering Pressure Hose - Revised Clamp Required
  • Vibration
    • Front End - Vibration
      • Overview
      • Introduction
      • Quick Service Tips & Detailed Trouble Shooting Procedure Information
      • Basics of Wheel Alignment
      • Mounting Tire, Tire Inflation Pressure & Rotation Information
• All Technical Service Bulletins
  • Rear Axle - Change to Correct Oil
  • A/T Fluid - Correct Applications
  • Odometer - Information Sticker Used After Replacing
  • Engine Oils - Suggested Usage
  • Oil - Abnormal Consumption
  • ATF Filter - Cleaning Deleted
  • Engine Oil - Recommended
  • A/C - Remove Clamp to Prevent Hose Break
  • A/C - Converting R12 System to R134a
    • Overview
    • Checking A/C System
    • Conversion of A/C System
    • Evacuate A/C System
  • Power Steering Pressure Hose - Revised Clamp Required
  • Tools - New and Modified
  • Engine - Poor Driveability When Cold
  • Wheel Bearings - New Type Bearings
  • Front Wheel Bearings - New Grease Cap
  • Expansion Tank Hose - Revised Routing
  • A/C - Condenser/Pressure Pipe Connections Changed
  • Wheel Hub - New Front Unit
  • Distributor - Oil Leakage
  • EVAP Carbon Filter - Revised
  • Oil Drain Pipe - Parts Order Information
  • A/C - False Indication of Leak From High Pressure Hose
  • Engine Oil - Recommendations
  • Engine - Oil Sample Analysis
  • Engine Oil - Viscosity Recommendation
  • Cooling System - Recycled Antifreeze
  • A/T, M/T, AWD - Approved Lubricants
  • Fuse Holder - Deformed
  • Engine - Hard Cold Starting and Performance
  • Front End - Vibration
    • Overview
    • Introduction
    • Quick Service Tips & Detailed Trouble Shooting Procedure Information
    • Basics of Wheel Alignment
    • Mounting Tire, Tire Inflation Pressure & Rotation Information
  • Alignment - Revised Front Toe Specification
  • Alignment - New Wheel Angle Tolerances
  • Alignment - Camber And Caster Adjustment
  • Rear Axle - Lubricating Oil Recommendations
  • Ignition - Replacement of Hall Switch
  • Warranty - Allowance For Federal Tax On Freon
  • Tires - Pressure Requirements/Recommendations
  • Wheels - Winter Wheel Applications (USA, Canada)
  • Wheels - Wheel Cross Reference
  • Tires/Wheels - Tire Rotation Recommendations