Alignment - Revised Front Camber Specifications

91volvo06

MODEL GROUP NUMBER

200 64 122

TITLE
ALIGNMENT SPECIFICATIONS


MARKET DATE
US and Canada March 1991


REFERENCE: TP 30864/6 (ENGLISH); 09/90; SPECIFICATIONS; page 78.
TP 88683/6 (ENGLISH); 11/90; POCKET DATA BOOKLET; page 101.
TP 30000/4 (ENGLISH); 07/87; FRONT WHEEL SUSPENSION; page 1, 8,9.
TP 30001/3 (ENGLISH); 03/83; STEERING; page 2, 8, 9.

New Front Camber Specification

The camber specification listed below should be used for all 200 series cars with power steering. Note that the upper range of the camber has been increased to +1 degree. However, observe the listed restrictions.

CAMBER ........................... + 1/4 to + 1 degree

RESTRICTIONS:

* The difference between left and right camber should not exceed 1/2 degree.

* If uneven tire wear, or if "feathering" of the tire is observed, the camber should be set as close to the lower range (+1/4 degree) as possible.

Note: This specification is considered to be retro-active for all 200 series cars. Thus this specification amends specifications stated in the above-referenced manuals.

Cars that have been set up to the previous specification, and remain within the previous specification, need NOT be re-adjusted to the new specification.