Step N1
Checking battery feed- Ignition off.
- Remove the fuse from the fusebox anchor fuse DD11 fitted to the alarm wiring harness and check that it is undamaged.
- fuse 14
Check also that main fuse 2 (11A/2) is intact.
- Connect a voltmeter between ground and fuse retainer.
The voltmeter should show battery voltage.
If the reading is correct:
- Continue with step N2. Step N2
If there is a deviation:
There is a break in the lead between the battery and the fuse.
- Rectify the fault, or renew the lead.