Seat Sensor/Switch: Service and Repair

Seat belt contact replacement
- Remove battery negative lead.
- Unhook contact under seat.
- Unplug the 1-pole connector (1).
- Unplug the 4-pole connector (2).
- Push out pin in item 3 in the main connector.
The lead is black on one side and green on the other side of the connector.
- Fit new unit.
- Reassemble in reverse order.
- Turn on ignition.
Check that the warning lamp on the combined Instrument panel flashes when anyone sits In the passenger's seat without fastening the seat belt; and that the lamp goes oft when belt is (fastened; also that it is not lit when no passenger is seated.