Electrical Switch - With Replaceable Illumination Bulb
SECTION3
GROUP
35
NO.
908
DATE
Oct. 1995
RE:
Switch with replaceable illumination bulb
960 1995-
REFERENCE:
TP 3502201, SECTION 3 (35-39), LIGHTING, INSTRUMENTATION AND OTHER ELECTRICAL EQUIPMENT; 700/900 1982-
Switch with replaceable illumination bulb
A switch with replaceable illumination bulb is being introduced into production from chassis number: 964: 48300 and 965: 18100.
If there is a fault in the illumination bulb this should be replaced - not the switch.
P/N illumination bulb:
9148906-2 All switches apart from those for hazard warning lamps
9148908-8 Hazard warning lamps switch
Replacing the switch illumination bulb
Pry out the switch with a screwdriver.
Important!
There is a lip for the screwdriver at the bottom of the switch.
Put something between the screwdriver and dashboard to avoid damaging the dashboard.
Remove the illumination bulb by twisting it counter clockwise (with the screwdriver) and pulling it out.
Install a new illumination bulb and test it. Reinstall the switch.
WARRANTY STATEMENT: Claims may be submitted under the New Car Limited Warranty when a manufacturing defect is present using claim type: 01
Operation No. Labor description Time allowance
35126-2 Illumination bulb for switch, replace (with switch removed) 0.1 hr