Rear Window - Additional Actions When Replacing
Section8
Group
84
No.
0004
Year
98
Month
04
Reference: TP 8101201 Section 8(81,84) Sheet metal and glass; 700/900 1982-
Additional actions when replacing rear window
Background:
Only the latest version rear windshields are stored as replacement parts. Due to the higher amperage of the rear windshield heater, the fuse must changed from 25A to 30A if the rear windshield is replaced. Applies to all 960 cars and S90/V90 cars up to the Chassis no.s shown.
The information on the decal in the fusebox cover and in the owners manual must be updated.
Chassis no:
964 M/Y 1991- S90 -131171
965 M/Y 1991- V90 -047699
Replacing fuse
Replacing fuse
Method
The fuse must be replaced due to the higher amperage of the rear windshield heater.
Remove:
- existing 25A fuse.
^ M/Y -1994 terminal 13.
^ M/Y -1995-terminal 1.
Install:
- fuse 30A.
2
Updating decal in fusebox cover
Cross out or scrape off 25A on the fuse decal so that it is completely illegible.
Write in 30A.
Terminal on decal
- M/Y -1994 terminal 13.
- M/Y 1995-terminal 1.
3
Updating Information in owners manual
Cross out the existing information (25A) for the rear windscreen heater fuse and write in 30A.
Confirm the alteration with a stamp or your signature.
WARRANTY STATEMENT:
Claims may be submitted under the New Car Limited Warranty when a manufacturing defect is present using claim type: 01
Operation No. Labor description Time allowance
37203-2 Replacing fuse in dashboard fusebox 0.1 hr
84312-2 Replacing rear windshield 4-door 2.1 hr
5-door 2.2 hr.