Convertible Top: Adjustments

CHQ3 Adjustment of Complete [1][2]Hood (Convertible Top) in Longitudinal Direction (X-Direction):

Before starting work, see CHA. Preparations Before Work. Procedures





Move [1][2]hood to the position shown in the image.





Open 3 press-studs on right and left sides of inner fabric side components.





Loosen locknut if guide pin positions have to be adjusted.

NOTE: 1/4 turn on nuts corresponds to approximately 1 mm (0.04") in longitudinal direction.

Guide pins on front lock should be vertically aligned and centered with lock housing opening, see A and B in image.

Adjust by turning setting screws clockwise or counter-clockwise.