Pinout Values and Diagnostic Parameters

Signal description





Hint: The terminals on the 1992 to 1994 model control modules are designated S and T. On the 1995- models they are designated B and E.

Note! It is important to check the control module and ground points according to Checking wiring and terminals. Permanent fault Checking Wiring and Terminals. Permanent Fault and Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults before taking readings.

U = DC in volts (V)
Ubat = Battery voltage
Ulow = Voltage close to 0 V