Diagnostic Test Mode (DTM) 2. Cruise Control (Gasoline Engines)

Diagnostic Test Mode (DTM) 2. Cruise control (gasoline engines)

Connecting Volvo Scan Tool





Is the Volvo Scan Tool (ST) connected to both the VIDA cart and the car and switched on?

Yes - Diagnostic Test Mode (DTM) 2

No - Connecting the Volvo Scan Tool (ST)

-------------------------------------------------

Connecting the Volvo Scan Tool (ST)




Connecting the Volvo Scan Tool (ST)

Connecting the Volvo Scan Tool (ST)
- Insert the blue memory cassette into the Volvo Scan Tool (ST)
- Connect adapter 951 1457-5 to cable 951 1458-3.
- Connect the VIDA cable between the adapter and the VIDA PC.

Is the data link connector (DLC) in the passenger compartment?

Yes - Data link connector (DLC) terminal

No - Data link connector (DLC) terminal

------------------------

Data link connector (DLC) terminal
- Connect cable from Volvo Scan Tool (ST) (no. 951 1458-3) to the adapter (no. 951 1459-1) for use in the engine compartment.
- Connect adapter to data link connector (DLC) A or B, see DLC DLC.
- Connect adapter cables to the battery.
- Power up the Volvo Scan Tool (ST).






Continue - DONE

------------------------

Data link connector (DLC) terminal
- Connect cable from Volvo Scan Tool (ST) (no. 951 1458-3) to the data link connector (DLC) in the passenger compartment.
- Power up the Volvo Scan Tool (ST).






Continue - DONE

------------------------

DONE - Diagnostic Test Mode (DTM) 2

-------------------------------------------------

Diagnostic Test Mode (DTM) 2




- Ignition off.
- Ignition on.
- For information about Diagnostic Test Mode (DTM) 2, see Confirmation of component activation (MODE 2) Confirmation of Component Activation (Mode 2).
Activate Diagnostic Test Mode (DTM) 2.





Select "Continue" to exit Diagnostic Test Mode (DTM) 2.

Continue - DONE

-------------------------------------------------