Removal and Replacement

Engine coolant hoses, replacing

Removing the engine coolant hoses
- Remove the clamp ring from the wiring. Drill out the rivets. Use a drill stop
- Disconnect the wiring from pipes
- Disconnect the wiring from the heater, water pump. Remove the wiring.

Installing the engine coolant hoses
- Secure the wiring on the heater and water pump
- Secure the wiring on the pipes
- Clamp the wiring, secure the clamps using rivets.




Secure a spacer clamp on the right-hand hose and on the nearest fuel line.

Finishing
Bleed the coolant system. See Bleeding the heater coolant system Bleeding the Heater Coolant System.