Programming and Relearning
Resetting the service reminder lamp (SRL)
Fault-tracing information
There are two makes of combined instrument panel for the 850:
- VDO
- Yazaki.
See for identification.
Only the VDO make has a built in diagnostic function and the possibility of communication.
There is only one make of combined instrument panel for the S70, V70 and C70; Yazaki with communication.
Alternatives:
1. 850 VDO
2. 850 Yazaki
3. S70/V70/C70 Yazaki.
Select the combined instrument panel as above.
1 - Query
2 - No Fault Found
3 - Query
-------------------------------------------------
Query
Connecting
Connecting the Volvo Scan Tool (ST)
The Volvo Scan Tool (ST) must be connected to the VIDA PC and data link connector (DLC) in the passenger compartment.
Is the Volvo Scan Tool (ST) connected and switched on?
Yes - Resetting, VDO
No - Connecting Volvo Scan Tool (ST)
-------------------------------------------------
Connecting Volvo Scan Tool (ST)
- Ignition off.
Install the blue memory cassette in the Volvo Scan Tool (ST).
Connect adapter 951 1457 Adaptor 951 1457 Adaptor to cable 951 1458 Scan tool cable 6 meters 951 1458 Scan Tool Cable 6 Meters.
Connect the VIDA communication cable between the adapter and the VIDA PC.
Connect the cable from the Volvo Scan Tool (ST) (P/N 951 1458 Scan tool cable 6 meters 951 1458 Scan Tool Cable 6 Meters ) to the data link connector (DLC) in the passenger compartment.
Power up the Volvo Scan Tool (ST).
Continue - Resetting, VDO
-------------------------------------------------
Resetting, VDO
- Ignition on.
- Activate the function to reset the service reminder lamp.
-------------------------------------------------
Connecting Volvo Scan Tool (ST)
- Ignition off.
Insert the blue memory cassette in the Volvo Scan Tool (ST).
Connect adapter 951 1457 Adaptor 951 1457 Adaptor to the cable 951 1458 Scan tool cable 6 meters 951 1458 Scan Tool Cable 6 Meters.
Connect VIDA communication cable between adapter and VIDA PC.
Connect cable 951 1458 Scan tool cable 6 meters 951 1458 Scan Tool Cable 6 Meters from Volvo Scan Tool (ST) to the data link connector (DLC) in the passenger compartment.
Switch on the Volvo Scan Tool (ST) switch.
Continue - Resetting, Yazaki
-------------------------------------------------
Resetting, Yazaki
- Ignition on.
- Activate the function to reset the service reminder lamp
-------------------------------------------------