Erasing Diagnostic Trouble Codes (DTCs)

Erasing diagnostic trouble codes (DTCs). AW50-42





Connection

Connection of Volvo Scan Tool (ST)
Volvo ST must be connected to both VIDA PC and vehicle to DLC in passenger compartment (models 1996-) or DLC A (models -1995).





Is Volvo ST connected and switched ON?

Yes - FAULT FOUND

No - No Fault Found

------------------------

FAULT FOUND - Erasing diagnostic trouble codes (DTCs)

No Fault Found - Connecting the Volvo Scan Tool (ST):

-------------------------------------------------

Connecting the Volvo Scan Tool (ST):




Connection of Volvo Scan Tool (ST)

Connection of Volvo ST




- Ignition off.
- Insert blue memory cassette into Volvo ST.
- Connect adapter 951 1457-5 to cable 951 1458-3.
- Connect VIDA communication lead between the adapter and the VIDA PC.

Is the data link connector (DLC) located in passenger compartment?

Yes - Connection to DLC

No - Connection to DLC

------------------------

Connection to DLC
- Connect Volvo ST cable (p/n 951 1458-3) to the adapter (p/n 951 1459-1) for use in the engine compartment.
- Connect the adapter to DLC A or B, see DLC DLC.
- Connect the adapter supply lead to battery.
- Switch on Volvo ST.





Press Continue.

Continue - DONE

------------------------

Connection to DLC
- Connect Volvo ST cable (p/n 951 1458-3) to the DLC in passenger compartment.
- Switch on Volvo ST.





Press Continue.

Continue - DONE

------------------------

DONE - Erasing diagnostic trouble codes (DTCs)

-------------------------------------------------

Erasing diagnostic trouble codes (DTCs)




- Ignition on.




- Select the Volvo Scan Tool (ST) symbol to erase diagnostic trouble codes (DTCs).
This will take at least one minute.

Numeric Result 0 - DONE

-------------------------------------------------