Activating Components/Functions

Activating components/functions

Activate Volvo Scan Tool (ST) Components/functions by pressing the YES/NO button to start and stop activation.





*) Only cars with turbocharger (TC) engines.
**) Only certain markets, USA and Canada
Use a stethoscope to listen for solenoid clicks.

Note! On cars with turbochargers (TC) and/or OBD II: When activating function 7 and 9, no change/symptom is indicated for the engine, transmission or combined instrument. To check these functions proceed as follows before activation is initiated:

- Ignition off.
- Connect the Test box
- Connect a voltmeter to the terminals as above. Check the voltmeter reading when function is activated.