Repair/Replacement Of Control Module Connector [NNNN]

NNNN. Repair/replacement of control module connector

NNNNA. Repair/replacement of control module connector

[NNNNA1]

Repair/replacement of connector as per general instructions.

It is important that the leads are connected correctly after repair/replacement of the connection Check therefore the leads connections before the control module is connected

Carry out as follows

- Ignition off
- Connect adapter 951 135 to the control module connector (to the cabling)
- Connect the test box 981 3190 to the adapter
- Control module disconnected
- Follow the measurements given in the table NNNNB. Table for connection from the connector to the control module.