Repair/Replacement Of Control Module Connector

Repair/replacement of control module connector

It is important that the leads are connected correctly after repair/replacement of the connection Check therefore the leads connections before the control module is connected
Carry out as follows
- Ignition off
- Connect adapter 951 1354 Adapter 25-pin ABS 850 951 1354 Adapter 25-Pin ABS 850 to the control module connector (to the cabling)
- Connect the test box 981 3190 Replaced by 9511428 981 3190 Replaced by 951 1428 to the adapter
- Control module disconnected
- Follow the measurements given in the table Table of control module connector terminals Table Of Control Module Connector Terminals.