SRS Warning Lamp

SRS warning lamp




The SRS system is continuously monitored by the micro processor in the sensor module. If a fault occurs, information about its type and location is stored. At the same time an indicator lamp lights in the combined instrument.
When the ignition is switched to position II, the indicator lamp lights with the other lamps on the panel to confirm that the bulb is working.
When the engine is started the SRS warning lamp goes out, showing that the system is fault free.
If the engine is not started when the ignition is switched to position II, the lamp should go out after approx. ten seconds.
There is a fault if the SRS warning lamp does not go out or lights when the car is being driven.