Signal Too High. Intermittent Fault

Checking Cables And Terminals
- Check cable between injector terminal 2 and engine control module (ECM) # A10 (EFI-115), # A38 (EFI-125), # A24 (EFI-135), # A23 (EFI-145), # A9 (EFI-155) for an intermittent short-circuit to supply voltage.

Then continue with:
^ Proceed to test step below.

Fault-tracing Information
For intermittent faults fault-tracing is not followed by a verification because the fault is not present at this moment.