Faulty Signal. Intermittent Fault
FAULTY SIGNAL. INTERMITTENT FAULTChecking Cables and Terminals
- Check cable between connector 24/15 terminal 9 and air conditioning (A/C) compressor for an intermittent open-circuit or an intermittent short circuit to ground.
- Then proceed to test step beolw.
Fault-tracing Information
- For intermittent faults fault-tracing is not followed by a verification because the fault is not present at this moment.
- Do you want to repeat fault-tracing?
Yes:
- Return to Checking Cables and Terminals section above.
No:
- Operation done