Signal Too High. Intermittent Fault
SIGNAL TOO HIGH. INTERMIFLENT FAULTChecking Cables and Terminals
- Check cable between turbocharger (TC) control valve terminal 2 and engine control module (ECM) #B41 for an intermittent short-circuit to supply voltage.
Then proceed to test step below.
Fault-tracing Information
- For intermittent faults fault-tracing is not followed by a verification because the fault is not present at this moment.
- Do you want to repeat fault-tracing?
Yes:
- Return to Checking Cables and Terminals section above.
No:
- Operation done