M 56 H / M 59 5-SPD M/T

Tightening Specifications
Axle Nuts 120 Nm + 60°
Engine Mount 50 Nm
Engine Torque Rod:
8 mm 18 Nm + 90°
10 mm 35 Nm + 120°
Engine to Transmission 50 Nm
Hub Nuts 120 Nm + 60°
Right Drive Shaft Bearing Cap 25 Nm
Throwout Bearing Guide Sleeve 10 Nm
Torque Converter/Drive Plate 35 Nm
Transmission Mounting 50 Nm
Sub-Frame Bolts:
First Main Bolts To 105 Nm + 120°
Then Support Plate Bolts To 50 Nm
Transmission To Starter Motor 40 Nm
Transmission Torque Rod:
8 mm 18 Nm + 60°
10 mm 35 Nm + 90°
Wheel Nuts 110 Nm