Rear

Tightening Specifications





Transverse Arm Mounting To The Trailing Arm:
Tighten The Nuts To: 50 Nm (37 ft. lbs.)
Then Angle Tighten: 120°





Tighten Anti-Roll Bar Mounting Bolts:
Bolts 1 In Illustration:
Tighten To 50 Nm (37 ft. lbs.).
Bolt 2 In Illustration:
Tighten To 50 Nm (37 ft. lbs.)
Angle-Tighten To 90°.
Bolt 3 In Illustration:
Tighten To 65 Nm (48 ft. lbs.)
Angle-Tighten To 90°