DTC EFI-314

3-1-4 CAMSHAFT POSITION SENSOR, SIGNAL





Trouble Code Conditions
- If the engine control module (ECM) does not receive a signal from the camshaft position (CMP) sensor for 2.4 engine revolutions, diagnostic trouble code (DTC) EFI-314 is posted after 1 second on the next attempt to start the engine.

Substitute value(s)
- On engine sot fuel injection and ignition are absent.

Possible source(s)
- Short-circuit to ground or supply voltage in signal cable.
- Open-circuit in signal cable, power cable or ground lead.
- Contact resistance in terminals.
- Defective camshaft position sensor.

Fault symptom(s)
- Engine does not start.