Signal Too Low. Permanent Fault
SIGNAL TOO LOW. PERMANENT FAULTChecking Signal Cable
- Check cable between turbocharger (TC) control valve terminal 2 and engine control module (ECM) #B41 for a short-circuit to ground.
Then proceed to test step below.
Verification
Hint: Afier carrying out the repair, check that the fault has been remedied as follows.
- Ignition ON.
- Activate turbocharger (TC) control valve.
- See Activating Components / Functions section.
- A clicking sound should be heard from the turbocharger (TC) control valve when it is activated.
Is the turbocharger (TC) control valve working?
Yes:
- Fault corrected
No:
- Proceed to test step below.
Fault-tracing Information
- The verification result shows that the fault persists.
- Do you want to exit fault-tracing?
Yes:
- Fault not corrected
No:
- Return to Checking Signal Cable section above