Mirror Glass

Door Mirror

Mirror Glass







- Press in the mirror glass as far as possible on one side.
- Insert a screwdriver and press on one of the catches holding the mirror upright.
- Pull the mirror out
- Disconnect the connector.
- Carry out on the other side if necessary.

Installation
- Locate the mirror glass mounting pins in the lugs on the swivel assembly.
- Connect the connector.
- Press the mirror glass into place.
- Check that the mirror glass is secure.

Power door mirror assembly







- Remove door panel.
- Remove 3 screws.

NOTE: Check that the rubber seal around the wiring is correctly installed in the lead-in through the door before the panel is installed.