Panels

Rear side panel

Remove:







- rear seat.
- seat belt covers.
- the parcel shelf.
- 1 screw for the front section of the side panel.
- the front seat belt from the rail.
- the link to the hinge for the side panel cover.

NOTE:
- Take care not to break off the cover of the rear side panel
- The panel also has 2 clips in the rear edge, these clips are fixed to the panel and cannot be removed until the panel has been removed.

CAUTION: If the clips break they must be replaced.

- Lift the panel up and out. The panel is fixed with 4 clips from the inside.

Seat belt cover

Remove:







- the cover.
- 1 screw.
- Lift the seat belt cover upwards/outwards.
- Thread the seat belt through the opening.

A-post panel







- Remove the panel for the upper windshield frames.
- Remove the panel which is fixed with 2 clips.

CAUTION: If the clips break they must be replaced.

Cover on the side panel/cover hinge

Remove:







- the link for the hinge.
- 2 screws for the cover panel.
- the 3 nuts for the hinge.

Cover trim

Remove:







- 6 screws for the cover trim.
- 2 screws for the cover trim surround.
- the 5 screws for the hinge.
- 6 screws for the cover trim (or 6 mounting washers after Chassis no.1110).